Affiliate disclosure: RVGearScout may earn a commission from qualifying purchases made through links in this article, at no additional cost to you.
A zip-on front shade panel that expands an RV awning’s usable shade while retaining a removable lower section for travel.
This review is based on current manufacturer information and practical RV considerations; RVGearScout has not performed hands-on testing on this unit.
Quick verdict
The Lippert Solera Super Shade is designed to add sun protection and privacy at the outer edge of a compatible RV awning. Its two-piece layout uses a shorter section at the roller tube and a longer panel that zips on at camp, reducing the amount of fabric that must be threaded into the awning each trip.
Sizing and awning compatibility are the decision points. Lippert offers multiple widths and identifies height limits, but the nominal awning size, actual fabric rail length, roller-tube slot, projection, and campsite ground must be checked against the exact shade part number.
How it fits an RV setup
Measure using Lippert’s current instructions rather than the distance between awning arms. Confirm the RV awning can accept the upper extension and that accessories already occupying the roller channel will not conflict. The lower edge needs suitable ground for stakes and tie-outs.
Install the panel with the awning stable and at a safe working height. Keep fabric clear of sharp corners, hot exhaust, grills, doors, and moving awning joints. The pull rod and storage bag simplify handling, but long panels can still catch wind during setup.
What stands out
- A two-piece zip design separates permanent and removable fabric sections.
- Mesh shade can reduce direct sun while retaining some outward visibility.
- Multiple widths address several common awning sizes.
- Included anchoring hardware supports a planned campsite setup.
The zip connection is the practical feature. Once the short upper piece is correctly installed, the larger panel can be added without repeatedly feeding a full-height screen through the roller track.
Limitations and checks
A shade panel increases wind area. Retract or remove it before storms, strong gusts, leaving the campsite, or whenever Lippert’s instructions require. Stakes are not a guarantee against wind damage, and an awning can transmit large loads into the RV sidewall.
The screen does not create a weatherproof room and should not be expected to stop blowing rain, insects from every direction, or determined pets. Verify campground staking rules and watch for buried utilities before driving anchors into the ground.
Who should buy it?
The Super Shade fits owners who want a simple front barrier for sun and partial privacy without enclosing the entire patio. A side panel addresses low-angle sun from the ends, while a full screen room better suits insect control and enclosed outdoor living.
Bottom line
The Solera Super Shade can make an exposed campsite more comfortable, provided the size and roller fit are confirmed. Its convenience depends on respecting wind and removing the panel before travel.
Check current Lippert Solera Super Shade RV awning panel availability on Amazon.
Related RVGearScout guides
- Carefree Sun Blocker guide
- ShadePro replacement fabric review
- Carefree SideBlocker review
- Browse this category
Research note: Product details were checked against Lippert Solera Super Shade product information. Confirm the current manual, specifications, compatibility, and warranty before purchase or installation.
Image note: Editorial use-case photo by Matthew Osborn on Unsplash. It illustrates the use context and may not depict the exact product reviewed.