Affiliate disclosure: RVGearScout may earn a commission from qualifying purchases made through links in this article, at no additional cost to you.
An exterior cargo platform that adds storage behind an RV, provided the bumper and frame are explicitly capable of carrying the combined static and dynamic load.
This review is based on current manufacturer information and practical RV considerations; RVGearScout has not performed hands-on testing on this unit.
Quick verdict
The Camco Eaz-Lift bumper-mount cargo carrier can free interior storage from bulky bins, leveling gear, or other weather-ready equipment. Mounting at the rear keeps dirty items outside and avoids occupying a tow-vehicle receiver, which is useful for campers short on pass-through space.
Rear cargo is also a structural and handling decision. Many square RV bumpers are intended mainly to store a sewer hose and are not rated for a loaded platform. The carrier’s own rating does not prove the bumper, welds, frame extensions, or RV rear wall can accept the load.
How it fits an RV setup
Identify the exact bumper size and construction, then obtain the RV manufacturer’s written load guidance. Inspect welds, rust, frame attachment, spare-tire position, ladder, stabilizers, and departure angle. If a frame-mounted support is required, have it designed or installed by a qualified RV or fabrication shop.
Calculate total load, including the carrier, brackets, boxes, tie-downs, and every item inside. Dynamic loads from potholes and driveway transitions can be much higher than the parked weight. Keep heavy objects low, centered, and firmly restrained against movement in every direction.
What stands out
- Exterior storage keeps bulky or dirty gear out of the living area.
- A broad platform can accept weather-resistant bins in several layouts.
- Bumper mounting may leave a receiver available for other approved uses.
- Open construction allows drainage and visual tie-down checks.
The everyday benefit is organization. Gear assigned to a fixed rear platform is easier to load consistently, but only if the platform does not create a new problem with weight distribution or access.
Limitations and checks
Rearward weight can reduce tongue weight on a travel trailer and contribute to instability. Reweigh the loaded trailer, confirm tongue-weight percentage, axle loads, and gross ratings, and test handling cautiously. Do not assume a few hundred pounds at the rear behaves like the same weight over the axle.
Cargo must not cover license plates, tail lamps, reflectors, cameras, or legally required visibility. Check heat clearance from exhaust, ground clearance, and overall vehicle length. Use rated tie-downs and inspect them at every stop; ordinary plastic totes are not structural restraints.
Who should buy it?
Consider it only when the RV maker or a qualified professional confirms the bumper and frame can carry the installed system. A frame-mounted receiver carrier or interior reorganization is safer when bumper capacity is unknown.
Bottom line
The Eaz-Lift carrier can create valuable storage, but the platform is the easy part. Structural approval, rear-weight effects, lighting visibility, and secure cargo determine whether the installation is responsible.
Check current Camco Eaz-Lift bumper mount cargo carrier availability on Amazon.
Related RVGearScout guides
- MORryde cargo tray guide
- Lippert underchassis storage guide
- BAL Hide-A-Spare guide
- Browse this category
Research note: Product details were checked against Camco Eaz-Lift cargo-carrier information. Confirm the current manual, specifications, compatibility, and warranty before purchase or installation.
Image note: Editorial use-case photo by Jairph on Unsplash. It illustrates the use context and may not depict the exact product reviewed.